3Com 3C13636 Configuration Manual page 216

3Com Router 3000 Ethernet Family
Configuration Guide
Table 11-17 Configure authentication mode for SSH user
Specify an authentication mode for an
SSH user
Restore the default, where login is
always denied
Specify a default authentication mode for
SSH users
Delete
authentication mode for SSH users
The authentication mode specified using the ssh user username authentication-type
command is only for an SSH user while the one specified using the ssh
authentication-type default command is the default authentication mode for all SSH
users. For an SSH user, the authentication mode configured using the ssh user
username authentication-type command is always preferred to the one configured
using the ssh authentication-type default command.
Note:
If password authentication is adopted, the user name specified in the ssh user
authentication-type command must be consistent with the user name defined in AAA.
If RSA authentication is adopted, the value of this argument is a local SSH user name
and needs not to be defined in AAA.
IV. Creating SSH users
All SSH users need authentication. Before creating an SSH user with the ssh user
command, you must specify a default authentication mode with the ssh
authentication-type default command.
Perform the following configuration in system view.
Table 11-18 Create an SSH user
Create an SSH user
Delete an SSH user
Operation
the specified
Operation
3Com Corporation
11-19
ssh
authentication-type { password | rsa |
all }
undo ssh
authentication-type
ssh authentication-type
{ password
password-publickey }
default
undo ssh authentication-type default
ssh user username
undo ssh user username
Chapter 11 Terminal Services
Command
user username
user username
default
| rsa | all
Command
|