3Com 3C13636 Configuration Manual page 102

3Com Router 3000 Ethernet Family
Configuration Guide
directly-attached network, an error is returned. You can use this function when pinging
a local host on an interface that has no route defined.
Table 4-25 Configure routing table bypass
Enable routing table bypass.
Disable routing table bypass.
By default, routing table bypass is disabled.
22) Configuring VPN instance information
Perform the following configuration in HWPing test group view.
Table 4-26 Configure VPN instance information
Configure VPN instance information
Remove VPN instance information
By default, no VPN instance information is configured.
This command applies to all tests except for DHCP test.
23) Configuring test group description
You may make a simple description on a test group, usually from the aspects of its test
items or test purpose.
Perform the following configurations in HWPing test group view.
Table 4-27 Configure test group description
Configure a test description.
Remove the test description.
By default, no description information is configured.
24) Configuring trapping
An HWPing test generates trap information regardless of whether it fails or succeeds.
You may configure to send or not to send the trap information to the NMS by making
use of the following command and its undo form.
You can configure HWPing test as well as the number of consecutive probe failures for
the system to send a trap for the test.
Operation
Operation
Operation
3Com Corporation
4-12
Chapter 4 HWPing Configurations
Command
sendpacket passroute
undo sendpacket passroute
Command
vpninstance name
undo vpninstance
Command
description string
undo description