3Com 3C13636 Configuration Manual page 52

3Com Router 3000 Ethernet Family
Configuration Guide
modem call-in
speed 57600
authentication-mode scheme
2) Configuring the locally authenticated default user name and password, enabling
Telnet and FTP services for the default user
local-user admin password cipher admin
level 3
service-type ftp telnet
service-type terminal
By default, the user name and password are both "admin".
3) Detecting all the Controller interfaces, setting the working status of the
E1/T1/E3/T3 interfaces to non-channelized, and generating the corresponding
Serial interfaces. For the T1 interface, use the channel-set command to bind all
the timeslots to one Serial interface.
controller e1 interface-number
using e1
controller e3 interface-number
using e3
controller t3 interface-number
using t3
controller t1 interface-number
channel-set 0 timeslot-list 1-24
4) Detecting all the Serial interfaces including the logical interfaces generated by
Controller interfaces, choosing PPP link layer encapsulating protocol and
configuring to get IP address through PPP negotiation, setting the interfaces into
UP status
Interface serial interface-number
link-protocol ppp
ip address ppp-negotiate
undo shutdown
5) Detecting all the Ethernet interfaces, enabling the dhcp client function, setting the
interfaces into UP status
Interface ethernet interface-number
ip address dhcp-alloc
undo shutdown
6) Detecting all the AM interfaces, configuring the working mode to flow mode and
the encoding format to Modem (set the CountryCode to UK if there is an E1/E3
module and otherwise to US), and setting the interface into UP status.
Interface analogmodem interface-number
async mode flow
country-code { united-kingdom | united-states }
country-code { united-kingdom | united-states }
Chapter 2 System Maintenance Management
3Com Corporation
2-4