3Com 3C13636 Configuration Manual page 69

3Com Router 3000 Ethernet Family
Configuration Guide
Severity
informational
debugging
# Enable to output log information of IP module and allow outputting the information
with the severity of warnings and lower levels only.
[3Com] info-center source ip channel snmpagent log level warnings
IV. Defining the contents of an information channel
Perform the following operations in system view.
Table 2-20 Define the contents of an information channel
Add a record to an information channel
Delete a record from an information
channel
module-name specifies a module name and default stands for the default record in the
information channel. level is the severity level of information and the information at a
level greater than severity is prohibited from being output. severity is the setting of
information level. channel-number and channel-name are the information channel
number and name to be set.
Each information channel has a default record for which the module name is default.
But for different channels, the record may have different default settings for logging
information, trapping information, and debugging information. If a module has no
explicit configuration record in the channel, the default configuration record will be
used.
Common prompt information
Debugging information
Operation
3Com Corporation
2-21
Chapter 2 System Maintenance Management
Description
Command
info-center source { module-name |
default } { channel { channel-number |
channel-name} } [ log { state { on | off } |
level severity }* | trap { state { on | off } |
level severity } * | debug { state { on |
off } | level severity }* ]*
undo info-center
{ module-name | default } { channel
{ channel-number | channel-name }
source