3
Library Configuration
This chapter explains how to configure an HP StorageWorks MSL Series tape library for normal
operation. Sections in this chapter include:
• Changing Default Configuration
• Setting a SCSI
• Setting Up a Reserved
• Configuring the Network
Changing Default Configuration Settings
For most applications, you do not have to change the default settings; however, if you do need to
change a configuration setting, use the procedures provided in the following sections. If you are
uncertain whether you need to change a setting, contact your authorized service provider.
Configuration settings that might need to be changed include:
• Setting a SCSI
• Setting Up a Reserved
• Configuring the Network
Change configuration settings using the graphical user interface (GUI) touch screen. For a complete
description of how the GUI touch screen works, see Chapter 4, "Operation" on page 49.
Setting a SCSI ID
Each tape drive installed in the library requires a unique SCSI ID. The information provided in this
section shows you how to set a SCSI ID.
To set a SCSI ID:
Turn the library on and wait until the Power-On Self Test (POST) concludes and the Status
1.
screen is displayed.
Select the Menu option.
2.
3.
Select SCSI in the Edit Options area to display the following screen.
Settings, page 39
ID, page 39
Slot, page 41
Settings, page 47
ID, page 39
Slot, page 41t
Settings, page 47
MSL6000 series tape library user guide
39