Viewing Firmware Version; Table 2 Autoloader Status; Table 3 Firmware Version Fields - Freecom SUPERLOADER3 LTO2-HH Manual

Table 2 Autoloader
Status
Status
Magazines
SCSI ID
Mode
BC Reader
Viewing Firmware
Version 3
Table 3 Firmware
Version Fields
Message
L=*
R=*
A digit 0 through 7
(default 5)
Random
SEQUENTIAL
Yes or No
To view the current firmware version, use the following procedure:
1 From the main menu, scroll to
2 From the
Status
3 From the
Autoloader
A list of messages appears on the LCD. The firmware version is listed
as
Firmware: VX.XX
firmware.
Field Description
Firmware The number indicates the firmware version.
EDC The number indicates the Error Correction Code that
was generated when the firmware was installed. The
autoloader uses this number to verify that the
firmware and the memory holding the firmware are
good.
SuperLoader 3 Autoloader User's Guide
Chapter 3 Operating the Autoloader
Description
The left magazine is present.
The right magazine is present.
The assigned SCSI ID for the autoloader.
The change mode is set to Random.
The change mode is set to Sequential.
A bar code reader is present.
, and then press
Status
submenu, scroll to
Autoloader
submenu, scroll to
where is the current installed version of the
X.XX
Viewing Status Information
.
Enter
, and then press
, and then press
Version
.
Enter
.
Enter
35