Choosing A Location; Table 1 Location Criteria - Freecom SUPERLOADER3 LTO2-HH Manual

Choosing a Location

Table 1 Location
Criteria
Criteria
Rack requirements
Room temperature
Power source
Weight
Air Quality
• Documentation CD containing all of the documentation in Adobe
Portable Document Format (PDF)
• Bar code labels
Choose a location that meets the following criteria (see
autoloader uses standard rack mounting hardware.
Description
Standard 19-inch rack with 2U of clearance.
10–35° C (50–95° F)
AC power voltage: 100–127 VAC; 200–240 VAC
Line frequency: 50–60 Hz
Note:
14.1 kg (31 lb.) unloaded
17.2 kg (38 lb.) loaded with 2 magazines, 16 cartridges
Minimize sources of particulate contamination. Avoid
areas near frequently used doors and walkways, cooling or
exhaust vents, stacks of supplies that collect dust, printers,
and smoke-filled rooms.
Caution:
SuperLoader 3 Autoloader User's Guide
Chapter 2 Installation and Configuration
Locate the AC outlet near the autoloader. The AC
power cable is the product's main disconnect
device and must be easily accessible at all times.
Excessive dust and debris can damage tapes
and tape drives.

Choosing a Location

®
2
table 1). The
9