Table 18 Asc/Ascq Field Descriptions - Freecom SUPERLOADER3 LTO2-HH Manual

Table 18 ASC/ASCQ
Field Descriptions
ASC/ASCQ Description
0C/00
Write Error
successfully write the customer
data to the tape.
11/00
Unrecoverable Read Error
exhausting the read recovery
algorithms, the drive was not
able to read the data correctly.
14/00
Entity Not Found
that was written on the tape was
not found while trying to read
the data.
47/00
SCSI Parity Error
communications problem.
80/01
Cleaning Required
detected a condition in which a
cleaning tape must be used.
(SDLT)
. Drive was not able to
. After
. A logical block
. SCSI bus
. The drive has
SuperLoader 3 Autoloader User's Guide
Suggested Action
• Problem may be the tape cartridge or the
drive. Check logs to correlate A401/A501
events with media type and ID to the
system logs.
• If the problem continues, contact
customer support.
• Problem may be the tape cartridge or the
drive. Check logs to correlate A400/A500
events with media type and ID to the
system logs.
• If the problem continues, contact
customer support.
• Problem may be the tape cartridge or the
drive. Check drive logs to correlate events
that may have led up to this condition.
• If the problem continues, contact
customer support.
• Check SCSI cables, terminators, and all
devices attached to the SCSI bus.
• Use a cleaning tape and/or different
media. Check drive logs to review related
events. If this persists with multiple
media after cleaning, the drive may need
to be replaced. If all related to one piece of
media, replace that tape cartridge.
• If the problem continues, contact
customer support.
Tape Drive Error Logs
165