Updating Firmware; Using A Firmware Upgrade Tape - Freecom VALUELOADER DLT User Manual

ValueLoader Administration

Updating Firmware

Updating Firmware
Using a Firmware
3
Upgrade Tape
44 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
To access this option, follow these steps:
From the Home screen or main menu, press the
1
until "Configuration" appears on the top line of the LCD
screen.
Press the
2 [Enter]
Press the or
3 [+] [–]
the screen. The second line on the LCD screen displays the
current status, either "On" or "Off."
Press the
4 [Enter]
are about to turn Autoload Mode on or off.
Press the
5 [Enter]
or press
[Cancel]
Regardless of the firmware update technique, DO
Caution:
NOT POWER CYCLE OR RESET THE
AUTOLOADER DURING THE UPGRADE
PROCESS. Doing so could cause the ValueLoader to
become inoperable.
This option performs a firmware update for the ValueLoader using
a firmware upgrade cartridge.
This code update operation assumes that the upgrade
Note:
tape is imported as part of this procedure. Do not import
the firmware update cartridge before starting this
procedure.
button to select.
button until "Autoload Mode" appears on
button. The LCD screen indicates whether you
button to accept the change to Autoload mode
to exit and not save the changes.
or button
[+] [–]
3