Front Panel
Diagnostic Tests
6
2 On the submenu, scroll to
appears.
3 Press
to return to the
Enter
Remote Management for any test results.
To perform a
Halt Test
1 Select
from the
Halt Test
submit.
2 Select
View Status
appears along with any text results.
You can perform the following diagnostic tests using the front panel:
•
Halt Test
•
Loader—Self Test
•
Loader—Health Check
•
Loader—Picker Test
•
Loader—Magazine Test
•
Loader—Inventory Test
To perform any of the front panel diagnostic tests:
1 From the main menu, scroll to
2 Scroll to the test that you want to run and press
If you are already logged in as Administrator, the test begins
executing immediately. The message
test is running.
The
Loader—Health Check
indicator while executing. When the test completes, either the
message
Test Successful
error code appears. Proceed to
SuperLoader 3 Autoloader User's Guide
Diagnostic Tests from the Front Panel
, and then press
Halt Test
submenu. Refer to On-board
Diagnostics
from On-board Remote Management:
drop-down menu, and click
Diagnostics
to see the results of the command.
Diagnostics
Running Test
test displays on ongoing progress
appears or the message
step
4.
Chapter 6 Diagnostics
Enter. User Abort
Test Stopped
and press
.
Enter
.
Enter
appears while the
and an
Test Failed
77