Basic Information Logs
•
Basic Information Logs
•
Log Descriptions
•
Error Codes
•
Tape Drive Logs
•
POST Failure Logs
Whenever any system or application actions occur, the autoloader or tape
drive generates logs recording the action. You can use some of these logs
to troubleshoot errors. These logs are described in
Troubleshooting. The other logs contain diagnostic and history
information and are explained in this section.
This section describes the logs for the autoloader and the tape drive. It
contains a description of each log type including the log's block
descriptor and field descriptions.
SuperLoader 3 Autoloader User's Guide
on page 145
on page 146
Chapter 9
Basic Logs
9
chapter 8,
9
137