Installing The Device Drivers; Tape Drive Device Driver - Freecom SUPERLOADER3 LTO2-HH Manual

Installing the Device Drivers

Tape Drive Device
Driver 2
Only the devices physically at the beginning and end of the SCSI bus
should be terminated. If the host is located at the beginning of the
SCSI bus, the host should already have a terminator installed.
• Verify the connection between the autoloader and host by going to
Settings>Control Panel>System>Hardware>Device Manager>Tape
and/or
Drive Media Changer
Windows XP and Windows Server
verifying the connection of SCSI devices, consult the operating
system documentation.
There are two device drivers associated with the SuperLoader 3
autoloader. One for the autoloader itself, and a second for the tape drive
within the autoloader.
Note: Device drivers are required if you intend to use the Microsoft
Windows 2000 native backup application. Commercial backup
applications provide all necessary device driver support. Refer
to
www.quantum.com
applications. Please note that Microsoft Windows NT
not include native support for autoloaders. A backup
application must be used if using the SuperLoader 3
autoloader under Microsoft Windows NT.
Microsoft Windows 2000:
1 Make sure that you are logged on to the host server with
administrator privileges.
2 Download the latest drivers from
service_support/downloads/default.htm
computer.
SuperLoader 3 Autoloader User's Guide
Chapter 2 Installation and Configuration
Installing the Device Drivers
®
in Microsoft Windows
®
2003. For more information on
for a list of compatible backup
http://www.quantum.com/am/
. Save the drivers to your host
®
2000, Microsoft
2
®
does
19