Data Compression - Freecom SUPERLOADER3 LTO2-HH Manual

Chapter 3 Operating the Autoloader

Data Compression

Data Compression

3
Compressing the data means that the autoloader can write more data to
the same amount of tape. Compression also increases the performance of
the data transfers from or to the SCSI bus. The data compression is drive
dependent and cannot be set from the front panel or On-board Remote
Management. Your backup application package may also have
information on compression. The front panel display will indicate
whether data compression is or
Enabled Disabled .
SuperLoader 3 Autoloader User's Guide 39