Accessory Pieces; Figure 20 Front Mount Features; Figure 21 Rear Mount Features - Freecom SUPERLOADER3 LTO2-HH Manual

Figure 20 Front
Mount Features
Figure 21 Rear Mount
Features

Accessory Pieces

7
Besides the rail parts themselves, there are two plates included with the
rail kit. These plates are used for various rack mountings. The front cover
plate is used on all rack rails. The 10-32 inside nut plate is used on the .375
inch square rail, the .280 diameter rail, and the M6 rails.
SuperLoader 3 Autoloader User's Guide
Chapter 7 Customer Replaceable Units (CRUs)
Installing and Removing the Optional V-Rail Kit
97