Table of Contents
Advertisement
Installation
Preparation
2
SCSI Bus
Requirements
2
Before you install your new Quantum SuperLoader 3 autoloader, unpack
it carefully and inspect it for any damage that might have occurred
during shipping. The
the packaging describes all the necessary information to unpack and
inspect your autoloader correctly.
Ensure that the work area is free from conditions that could cause
electrostatic discharge (ESD). Discharge static electricity from your body
by touching a known grounded surface, such as your computer's metal
chassis.
There are minor differences between the Quantum SuperLoader 3 LTO-2
and the Quantum SuperLoader 3 VS160/SDLT600 autoloaders.
SuperLoader 3 LTO-2
You must connect the Quantum SuperLoader 3 LTO-2 to one of the
following SCSI bus types:
•
Ultra2 SCSI Low-voltage Differential (LVD), Single-ended (SE) SCSI
bus
The autoloader is not compatible with a High-voltage
Note:
Differential (HVD) SCSI bus.
SuperLoader 3 LTO-3/VS160/SDLT600
You must connect the Quantum SuperLoader 3 LTO-3, VS160 or
SDLT600 autoloader to one of the following SCSI bus types:
•
Ultra 320 SCSI-3, LVD SE SCSI bus
•
Ultra 160 SCSI-3, LVD SE SCSI bus
SuperLoader 3 Autoloader User's Guide
Chapter 2 Installation and Configuration
Quantum SuperLoader 3 Quick Start Guide
Installing the Autoloader
included in
2
2
7
Advertisement
Table of Contents
