Updating The Firmware; Hdd Power Management; Upgrade - Freecom DUAL DRIVE NETWORK CENTER User Manual

External removable dual network hard drive / 3.5" / gigabit lan / usb 2.0 host

Hide thumbs Also See for DUAL DRIVE NETWORK CENTER:

Table of Contents

Dual Drive Network Center Functions

The hard disks can be configured so that they are shut down after a certain time if they

are not being used. This saves energy and increases the working life of the hard disk. This

option is deactivated as standard.

Activate/deactivate the power management with Enable/Disable. Then select from the

pull-down menu the time after which the hard disk will be switched to standby. You can

select from the following settings:

- 10 min

- 20 min

- 30 min

- 60 min

- 120 min

6.2.7 Updating the Firmware

Go to Setup -> Upgrade

Click on "Browse" and select the downloaded file from http://www.freecom.com. Mit The

new firmware is installed by clicking on "Apply". The device then restarts automatically

New firmware normally rectifies faults and extends the functions of your Dual Drive Network

Center. Check at

http://www.freecom.com

whether new firmware updates are available.

Table of Contents

Show Quick Links

Table of Contents

Network storage center