Bugcheck Error Logs (Sdlt600 Only); Table 19 Bugcheck Log Field Descriptions - Freecom SUPERLOADER3 LTO2-HH Manual

Bugcheck Error Logs (SDLT600 only)

Bugcheck Error Logs (SDLT600 only)
Table 19 Bugcheck
Log Field Descriptions
Field
Event Number: The Event Number is one of the common first line fields explained in the Event
Types sections. Below is a listing of the Bugchecks for each event number.
B810
E204
EE01
EE02
166
Bugcheck Error logs typically indicate that the firmware has reached a
point in the decision process that requires a drive reset. There are 11
bugchecks, indicated by the Bugcheck Error field found in the event log's
first line. The following conditions may cause a bugcheck:
• Hardware errors
• Media errors
• Power supply problems
• External conditions (shock, vibe, hot, cold, and so on)
• Firmware problems
Note: Typically, firmware problems are not the cause and you
should check for other sources. If it is determined to be a
firmware issue, contact customer support.
Description
Library Port Communications problems—Library or drive problem. If
the problem continues multiple times after you reset the drive, contact
customer support.
Unexpected Time 2 Interrupt—Drive problem. If the problem continues
multiple times after you reset the drive, contact customer support.
Spurious Non-Askable Interrupt—Drive problem. If the problem
continues multiple times after you reset the drive, contact customer
support.
Spurious Time Interrupt—Drive problem. If the problem continues
multiple times after you reset the drive, contact customer support.
SuperLoader 3 Autoloader User's Guide
2