Removing a
Magazine Blank
7
Reinstalling a
Magazine
7
Installing a
magazine blank
7
Your autoloader comes equipped with either two magazines, or one
magazine and one magazine blank. The autoloader will not function
without both magazine bays equipped with either a magazine or a
magazine blank.
To remove a magazine blank:
1 Pull the magazine blank straight out.
2 Replace with another magazine blank or a cartridge magazine (see
Reinstalling a
Magazine).
To install a cartridge magazine:
1 Grasp the magazine by the handle with one hand and support it
underneath with the other hand.
2 Slide the magazine into the magazine bay. Make sure you position
the magazine correctly; it should slide smoothly.
Warning:
Insert the magazine slowly to avoid damaging
internal components or the autoloader.
3 The magazine is correctly installed when you feel it click into place
and the front is flush with the front panel.
To install a magazine blank:
1 Grasp the magazine blank by the handle with one hand and guide
the blank into the magazine bay.
2 Slide the magazine blank into the magazine bay until it stops.
Warning:
The magazine blank is correctly installed when you
feel it click into place and the front of the blank is flush
with the front panel of the autoloader.
SuperLoader 3 Autoloader User's Guide
Chapter 7 Customer Replaceable Units (CRUs)
Replacing a Magazine or Magazine Blank
83