Table of Contents
Advertisement
Updates Page
Note:
By entering an improper range of IP addresses, a user could
possibly lock out all IP clients from administering the
autoloader. If this occurs, you can restore the default values by
running
Restore Default
.
Menu
You can browse to find system updates and then upload the updates. To
get system updates:
1 From any page, click the
screen displays.
2 Click
to navigate to the host system for the update file. The
Browse
file should end in an
3 Click
.
Upload
4 Click
in response to the confirmation box. The autoloader
OK
automatically uploads the new code and processes it to the system.
A Microsoft issue can keep a user from updating drive or
Note:
loader firmware over the On-board Remote Management
interface. This can occur under Windows Server 2003 with
Service Pack 1 (SP1), or if a user has installed Microsoft
Security Update MS05-019. This problem will appear with a 6F
Communication Error message on the front panel with the
warning light on. On-board Remote Management will
continue to report the autoloader status as
Microsoft has described a workaround for this problem in
their product with Technical Support Article 898060 (
support.microsoft.com/default.aspx?scid=898060
occurs, the autoloader should be restarted to avoid further
communication errors.
SuperLoader 3 Autoloader User's Guide
Chapter 4 On-board Remote Management
from the front panel
heading. The
Updates
extension.
.img
Updates Page
Configuration
4
Firmware Update
.
Initialization
http://
). If this problem
53
Advertisement
Table of Contents
