Table of Contents
Advertisement
Chapter 4 On-board Remote Management
Configuration Page
Feedback on
Pages
4
Configuration Page
System
Operations
Options
4
44
If there is feedback from the system when you submit a request, the
feedback appears beneath the
have to scroll to see the feedback information.
The
page includes a submenu on the left-hand side of the
Configuration
page. You can set the
options from this page.
The options listed under
,
Compression
Cleaning Tape
SCSI ID
You can change the drive's SCSI ID from On-board Remote Management.
To change the SCSI ID:
1 From any page, click the
screen displays.
2 Under
System Operations
3 Click the drop-down box to select a number to assign for the new
SCSI ID.
4 Click
.
submit
You must perform a system reset before the new SCSI ID
Note:
takes effect, or you can use the front panel to power cycle
your machine.
Mode
You can set the autoloader to either
change mode is
Random
SuperLoader 3 Autoloader User's Guide
button. In some cases, you may
submit
,
System Operations
Networking
System Operations
,
, and
Magazines
Configuration
, select
SCSI ID
Random
.
, and
Security
include
,
SCSI ID
Mode
.
System Time
heading. The
Configuration
.
or
. The default
Sequential
4
,
4
4
Advertisement
Table of Contents
