Table of Contents
Advertisement
Chapter 3 Operating the Autoloader
Viewing Status Information
Viewing Element
Status
3
36
Field
Description
HW Rev
The number indicates the hardware version.
ME Rev
The number indicates the mechanical version.
The element status reports the status of the magazine slots. The status
indicates whether a slot contains a cartridge or not, and which slot is
allocated as the cleaning cartridge's slot. To view an element's status:
1 From the main menu, scroll to
2 From the
submenu, scroll to
Status
3 From the
Autoloader
press
.
Enter
4 Press
.
Enter
You can scroll through each of the slots. Slots that are occupied by a
data cartridge are indicated by an asterisk (
assigned to a cleaning cartridge is indicated with an exclamation
point (
). The slot that is occupied by a cleaning cartridge is indicated
!
with an ampersand (
5 Scroll to the slot containing the cartridge for which you want to see
the label, or the cartridge you want to move, and then press
The
Element Status
that cartridge. A move command also appears on the screen.
Note:
The
Move
disabled or if you are logged in as Administrator or
Operator.
If you want to move the cartridge, scroll until the location you want
to move to appears under
want to move the cartridge, press
SuperLoader 3 Autoloader User's Guide
, and then press
Status
Autoloader
submenu, scroll to
Element Status
).
@
screen appears, displaying the bar code label for
command appears only if the security is
, and then press
To:
Escape
.
Enter
, and then press
, and then
). The empty slot that is
*
Enter
. If you do not
Enter
.
.
Enter
.
Advertisement
Table of Contents
