Autoloader Shock Specifications
Operating
Non-Operating
Tape Drive Specifications
LTO-2 Drive
1
Specifications
Description
Read/write transfer rate: maximum
sustained (LTO Ultrium 2 media)
Burst transfer rate
Average access time
Loading time to BOT (for previously written
tape)
Unloading time from BOT
MCBF
Interface type
3 G, 5 ms half-sine, 3 pulses (+/-) per axis, X, Y, Z
20 G, 8 ms half-sine, 3 shocks (+/-) per axis, X, Y, Z
Quantum LTO-2
Noncompressed mode: 93.6 GB/hr.
Compressed (2:1 typical): 187.2 GB/hr.
160 MB/s
68 seconds (from BOT)
75 seconds (maximum)
30 seconds (maximum)
> 400,000 cycles at 100% duty cycle
Ultra2 SCSI
SuperLoader 3 Autoloader User's Guide
Appendix A Specifications
Autoloader Shock Specifications
1
1
153