Grounding Methods - Freecom SUPERLOADER3 LTO2-HH Manual

Appendix C Regulatory Statements

Grounding Methods

Grounding Methods
3
There are several methods for grounding. Use one or more of the
following methods when handling or installing electrostatic-sensitive
parts:
Use a wrist strap connected by a ground cable to a grounded workstation
or computer chassis. Wrist straps are flexible straps with a minimum of
1 mega-ohm 10 percent resistance in the ground cords. To provide proper
ground, wear the strap snug against the skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
Use conductive field service tools.
SuperLoader 3 Autoloader User's Guide 191