Event Error Logs (SDLT600 only)
Event Error Logs (SDLT600 only)
Table 20 Error Event
Logs Field
Descriptions
Field
V Number
Date
Time Stamp
168
These logs record basic drive events including drive errors, calibration,
and history-related actions. There are 14 event error logs, indicated by the
Event number filed, and the Event number is located on the first line. All
Event Error logs contain the same specialized fields.
Description
The version of firmware the drive was using when the event
was logged.
A reference date for when the firmware was created.
The total time in which the tape drive has had power applied
to the tape drive since the last power cycle. This is hours,
minutes, seconds, and milliseconds. There is no date
associated with the power-up time.
In addition to the specialized fields, each Event Error log has specific
information about the cause and the suggested actions to follow for
troubleshooting errors. This information can be found in the block
descriptors of each log. To find information on specific Event Error log
entries, see:
•
A500: Hard Read Error
•
A501: SDLT Hard Write Error
•
A502: SDLT Loader Communication Error
•
A503: SDLT Drive Servo Error
•
A507/A508: Directory Read Failure/Directory Write Failure
page 179
SuperLoader 3 Autoloader User's Guide
on page 171
on page 173
on page 173
2
on