Setting The Subnet Mask; Setting An Ip Gateway - Freecom SUPERLOADER3 LTO2-HH Manual

Chapter 5 Administration
Configuring the Autoloader
Setting the Subnet
Mask 5
Setting an IP
Gateway 5
64
When you have advanced through all of the digits of the IP address,
the autoloader displays
Note: If you make a mistake, press
digit you want to change.
6 Press . The
Enter Configuration
now in effect. You do not need to reboot the autoloader.
7 Press or
Escape Enter
Creating a subnet mask is a method of splitting IP networks into a series
of subgroups, or subnets, to improve performance or security.
To set a subnet mask:
1 From the main menu, scroll to
2 From the
Configuration
3 From the
Ethernet
.
Enter
4 At each position of the Subnet Mask address, use the up and down
arrows to change the value of each digit. Press
cursor to the next digit.
When you have advanced through all of the digits of the subnet mask
address, the autoloader displays
Note: If you make a mistake, press
digit you want to change.
5 Press Enter.
New Subnet Mask xxx.xxx.xxx
not need to reboot the autoloader.
6 Press or
Escape Enter
To set an IP gateway:
1 From the main menu, scroll to
2 From the
Configuration
SuperLoader 3 Autoloader User's Guide
Enter to save .
Escape
submenu appears and the static IP is
to return to the Ethernet submenu.
Configuration
menu, scroll to
Ethernet
submenu, scroll to
Set Subnet Mask
Enter to save.
Escape
to return to the Ethernet submenu.
Configuration
menu, scroll to
Ethernet
to backspace to the
, and then press
Enter
, and then press
, and then press
to advance the
Enter
to backspace to the
appears on the LCD. You do
, and then press
Enter
, and then press
.
.
Enter
.
.
Enter