Table of Contents
Advertisement
Chapter 6 Diagnostics
On-board Remote Management Diagnostic Tests
On-board Remote Management Diagnostic Tests
78
3 If you are not logged in, you will be asked to enter the Administrator
password. Do the following:
a
From the front panel, enter the administrator password by using
the
and
Up
Down
to move to the next digit. To move to the previous digit,
Enter
press
. When you have entered the entire six digit
Escape
password, you will be asked to press
submit the password. If the password is incorrect, you will be
asked to re-enter it using the same procedure. Otherwise, you
will be returned to the
desired test.
appears while the test is in progress. To stop the test
Running Test
prematurely, see
b
The
Loader—Health Check
indicator while executing. When the test completes, either the
message
Test Successful
error code appear.
4 If the test is successful, press
menu. For detailed results of a test, use On-board Remote
Management to retrieve the diagnostic test status (see
Using On-board Remote
You can perform the following diagnostic tests from On-board Remote
Management:
•
Halt Test
•
Loader—Self Test
•
Loader—Health Check
•
Loader—Picker Test
SuperLoader 3 Autoloader User's Guide
scroll arrows to select each digit, and then press
Enter
menu. Press
Diagnostics
Stopping a Diagnostic
test displays an ongoing progress
appears or the message
to return to the
Enter
Management).
one more time to
to run the
Enter
Test.
and an
Test Failed
test
Diagnostics
Diagnostics
6
Advertisement
Table of Contents
