Table of Contents
Advertisement
Chapter 6 Diagnostics
Diagnostic Tests from the Front Panel
Setting the
Security
6
Stopping a
Diagnostic Test
6
76
When you enable the security function, the diagnostic tests are password
protected to ensure data integrity. To access any of the diagnostic tests,
you must first enter an Administrator password. If you do not enter the
password, you will be prompted to enter the password when you
attempt to perform a diagnostic test.
To enter an Administrator Password:
1 From any menu, click the
displays.
2 On the
Command
.
Enter
3 On the
Enter Password
press
.
Enter
The
screen appears with a row of asterisks. A text box appears
Login
above the first asterisk.
4 In the textbox, scroll to the first number of the password, and then
press
. The text box above the asterisk disappears and another
Enter
text box appears above the next asterisk.
5 Repeat
step 4
to enter the remaining numbers of your password.
Note:
Press
Escape
necessary.
When you have finished entering your password,
appears on the LCD below the asterisks.
6 Press
to submit your password. The display returns to the
Enter
submenu.
Password
At times you may need to stop a diagnostic test while it is in progress.
Certain diagnostic tests even require you to stop them or they run
continuously. To stop a diagnostic test while it is running, use the
function. When you select
Test
functions complete, and then the diagnostic test is stopped.
To perform a
Halt Test
1 While the diagnostic test you wish to stop is running, press
The
submenu appears.
Diagnostics
SuperLoader 3 Autoloader User's Guide
heading, The
Commands
submenu, scroll to
Enter Password
submenu, scroll to
to backspace to a previous text box, if
, any picker or magazine
Halt Test
from the front panel:
screen
Commands
, and then press
, and then
Administrator
Submit Password
Enter
Halt
Escape
.
Advertisement
Table of Contents
