Programming A Confidential Id; Programming A Polling Id - Ricoh Aficio 2022 User Manual

Programming a G3 Fax Number
A Press [G3 Fax No.(Dir.)].
B Enter your facsimile number
using the number keys, and
then press [OK].
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key.
F F F F
Press [Exit].
G G G G
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.

Programming a Confidential ID

Program a Confidential ID to print a
Confidential Reception. See p.36
"Printing a Confidential Message".
Note
❒ If you do not program a Confiden-
tial ID, you cannot receive a Confi-
dential Transmission.
A A A A
Press the { { { { User Tools/Counter} } } } key.
Using Key Operator Settings
B B B B
Press [Facsimile Features].
C C C C
Press [Key Operator Tools].
D D D D
Press [Program Confidential ID].
E E E E
Enter an ID using the number
keys, and then press [OK].
Note
❒ A Confidential ID can be any
four-digit number, except 0000.
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key be-
fore pressing [OK], and then try
again.
❒ To cancel programming an ID,
press [Cancel]. The display re-
turns to that of step
F F F F
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.

Programming a Polling ID

Program a Polling ID to use the
Transfer Request, Transfer Station,
Default ID Polling Transmission, and
Default ID Polling Reception func-
tions. When you use ID Transmission,
program the same ID as the one pro-
grammed on the sender's machine.
Reference
p.10 "Polling Transmission"
p.13 "Polling Reception"
p.52 "Transfer Request"
p.75 "Selecting transmission op-
tions for a single transmission"
D
.
9
183