Netware Printing - Ricoh Aficio 2022 User Manual

Appendix
❖ ❖ ❖ ❖ When a dial-up router is connected in
a network environment
The settings for the delivery server
to be connected must be made ap-
propriately for the machine with
ScanRouter V2 Lite/Professional,
Auto Document Link, or DeskTop-
Binder V2 Lite/Professional. In ad-
dition, set up connected devices
using the I/O settings of Scan-
Router V2 Administration Utility.
If the network environment chang-
es, make the necessary changes for
the delivery server using the ma-
chine, the administration utility of
client computers, Auto Document
Link, and DeskTopBinder V2
Lite/Professional. Also, set the
correct information for the con-
nected devices using the I/O set-
t i n g s
Administration Utility.
Important
❒ If the machine is set up to con-
nect to the delivery server via a
dial-up router, the router will
dial and go online whenever a
connection to the delivery serv-
er is made. Telephone charges
may be incurred.
9
❖ ❖ ❖ ❖ When connected to a computer that
uses dial-up access
• Do not install ScanRouter V2
Lite/Professional on a compu-
ter which uses dial-up access.
• When using ScanRouter V2
Lite/Professional, DeskTop-
Binder V2 Lite/Professional,
Auto Documen t Link, or a
TWAIN driver on a computer
with dial-up access, a dial-up
connection may be performed
when connecting to the delivery
server and other equipment, de-
pending on the setup. If the
138
o f S c a n R o u t e r
computer is set up to connect to
the Internet automatically, the
confirmation dialog box will not
appear, and telephone charges
may be incurred without your
being aware of it. To prevent
unnecessary connections, the
computer should be set up so
the confirmation dialog box al-
ways appears before establish-
ing a connection. Do not make
unnecessary connections when
using the above listed software.

NetWare Printing

Form feed
You should not configure form feed
V 2
on NetWare. Form feed is controlled
by the printer driver on Windows. If
NetWare form feed is configured, the
printer might not work properly. If
you want to change form feed set-
tings, always configure them using
Windows.
• Under Windows 95/98/Me, clear
the [Form feed] check box on the
[Printer Settings] tab in the printer
properties dialog box.
• Under Windows 2000/XP, clear
the [Form feed] check box on the
[NetWare Settings] tab in the printer
properties dialog box.
• Under Windows NT 4.0, clear the
[Form feed] check box on the [Net-
Ware Settings] tab in the printer
properties dialog box.