Ricoh Aficio 2022 User Manual page 989

Ricoh aficio 2022: user guide
Hide thumbs Also See for Aficio 2022:
Table of Contents

Advertisement

ROUTE
Use the "route" command to control
the routing table.
This command allows you to config-
ure and display routing information.
You can change the network configu-
ration from remote computers using
this command.
Note
❒ The maximum number of routing
tables is 16.
Commands Topics of setting
route add
Adds a host/network route
{host |
to "destination", and a gate-
net}|route
way address to "gateway" in
add {host |
the table. Host becomes the
net} desti-
default.
*1
nation
*1
gateway
route de-
Deletes a host/network route
lete {host |
from the table. Host becomes
net}|route
the default.
delete {host
| net} desti-
*1
nation
route get
Displays only route informa-
{destina-
tion corresponding to a spec-
*1
ified destination. When the
tion
}
destination is unspecified, all
routing information is dis-
played.
route active
You can turn the specified
{host |
destination on or off. Host be-
net}|route
comes the default.
active {host
| net} desti-
*1
nation
on/off
route add
You can set the default gate-
default
way address.
*1
gateway
route flush
Deletes all routing informa-
tion.
*1
IP address
Remote Maintenance by telnet
SLP
Use the "slp" command to configure
SLP settings.
You can search the NetWare server
using SLP in the PureIP environment
of NetWare5/5.1, 6. Use the "slp"
command to configure the value of
TTL used by the SLP multi-cast-pack-
et.
Note
❒ The default value of TTL is "1". A
search is executed only within a lo-
cal segment. If the router does not
support multi-cast, the settings are
not available even if the TTL value
is increased.
❒ The acceptable TTL value is 1 - 255.
msh> slp ttl {1 - 255}
SPRINT
Use the "sprint" command to view
and configure SCSI print (SBP-2) on
IEEE 1394.
Limitation
❒ You can use this function when the
optional IEEE 1394 board is in-
stalled.
❖ ❖ ❖ ❖ Viewing settings
The following command displays
the current IEEE 1394 (SCSI print)
settings:
msh> sprint
❖ ❖ ❖ ❖ Bidirectional configuration for IEEE
1394 (SCSI print)
msh> sprint bidi {on |
off}|msh> sprint bidi {on
| off}
Use this setting to select whether
IEEE 1394 (SCSI print) is bidirectional
or not. The default is "on".
9
101

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio 2027Dsm622Dsm627Ld122Ld127

Table of Contents