Ricoh Aficio 2022 User Manual page 1095

HP-UX
❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file
The following line is added to the /etc/hosts file. The IP address and printer
host name previously entered in the installation script will be used:
192.168.15.16 np # Network Printer
• "192.168.15.16" is the IP address, "np" is the host name, the comment
comes after the #.
Note
❒ The /etc/hosts file contains a list of IP addresses and names of all hosts
communicating on the network. Each entry is delimited with a space or a
tab, and each line is separated with a return.
❒ If you do not use NIS or DNS, you must enter the IP address and host name
of each workstation using the network printer in the /etc/hosts file.
❖ ❖ ❖ ❖ Registering the printer
The installation shell script registers the printer as a remote printer using the
procedure below:
A Stop the scheduler.
/usr/lib/lpshut
B Register the printer.
/usr/lib/lpadmin -Pnp -v/dev/null -mrmodel
-ormnphost -orpoption -ob3
• "np" is the printer name, "nphost" is the host name.
For more information about "option", see p.19 "Specifying the Device
Option".
"lp" will be assigned if the option is not used.
C
Set the printer so the print job is put in the print queue.
/usr/lib/accept np
D Set the printer to perform the print job.
/usr/lib/enable np
E
Restart the scheduler.
/usr/lib/lpsched
Using the Installation Shell Script
1
13