Ricoh Aficio 2022 User Manual page 232

Copying
Sample copy
Use this function to check copy set-
tings before making a long copy run.
Note
❒ This function can be used only
when the Sort function is turned
2
on.
A A A A
Select Sort and any other neces-
sary functions, and then place the
originals.
B B B B
Press the { { { { Sample Copy} } } } key.
One copy set is delivered as a sam-
ple.
C C C C
If the sample is acceptable, press
[Print].
The specified number of copies is
made, minus one for the proof
copy.
Note
❒ If you press [Suspend] after
checking the results, return to
A
step
as necessary. You can change the
settings for Staple, Duplex, Copy
Orientation, Stamp, Margin Ad-
just, and Cover/Slip Sheet.
However, depending on the
combination of functions, you
may not be able to change cer-
tain settings.
38
to adjust the copy settings
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is turned
on.
A A A A
While "Copying" is displayed,
press the { { { { Clear/Stop} } } } key.
B B B B
Press [Change Quantity].
C C C C
Enter the number of copy sets us-
ing the number keys, and then
ZHWS020E
press the { { { { #} } } } key.
Note
❒ The number of sets you can en-
ter differs depending on when
the { { { { Clear/Stop} } } } key is pressed.
D D D D
Press [Continue].
Copying starts again.