Programming/Changing Transfer Boxes - Ricoh Aficio 2022 User Manual

Key Operator Setting
E E E E
Press [Delete], and then select the
box you want to delete.
With a programmed password
A Enter a password using the
number keys, and then press
[OK].
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key.
9
F F F F
Press [Delete].
Note
❒ To cancel deleting a box, press
[Do not Delete]. The display re-
turns to that of step
G G G G
Press [Exit].
H H H H
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.
178

Programming/changing Transfer Boxes

This function turns your machine into
a fax relay station. Documents sent
with a SUB Code that matches the
SUB Code programmed as a Transfer
Box are received, and then relayed to
a programmed receiver.
Since documents can be sent to multi-
ple destinations in a single transfer re-
quest, you can economize on call
charges when sending to remote des-
tinations.
Note
❒ Inform the Requesting Party of the
SUB Code assigned to the Transfer
Box. When they want to have a
message transferred by your ma-
chine, ask them to send the mes-
s a g e
Transmission and specifying this
SUB Code. If a password has also
been programmed, inform them of
this too, and ask them to enter it as
the SID code.
E
.
You can store the following items:
• Box name (required)
Up to 20 characters
• SUB Code (required)
Up to 20 characters long and can be
composed of digits 0-9, "#", "*",
and spaces (the first character can-
not be a space).
u s i n g S U B C o d e