Ricoh Aficio 2022 User Manual page 993

❖ ❖ ❖ ❖ NBT scope ID setting
You can configure the NBT scope
ID.
Limitation
❒ Enter a scope ID using up to 31
alphanumeric characters.
msh> wins interface name
scope scope ID
Note
❒ If you receive different scope
IDs from DHCP and WINS, the
scope ID from DHCP takes pri-
ority.
Interface Interface to be config-
name ured
ether Ethernet interface
IEEE 802.11b interface
*1
wlan
IEEE 1394 interface
*2
ip1394
*1
Available when
802.11b interface kit is installed.
*2
Available when the optional 1394
interface board is installed.
AutoNet
Use the "autonet" command to config-
ure AutoNet settings.
❖ ❖ ❖ ❖ Display
The following command displays
the current AutoNet settings.
msh> autonet
❖ ❖ ❖ ❖ Configuration
You can configure the AutoNet
settings.
m s h >
i n t e r f a c e _ n a m e
[on|off]|[on|off]
Note
❒ Select [on] to enable AutoNet.
❒ Select [off] to disable AutoNet.
❖ ❖ ❖ ❖ Interface Priority Configuration
the optional
a u t o n e t
Remote Maintenance by telnet
You can assign priorities govern-
ing which interface obtains Au-
toNet parameters.
m s h > a u t o n e t p r i o r i t y
interface_name
Note
❒ Priority assignment is useful
when connecting more than one
interface to the machine.
❒ If an interface is not selected, the
interface appears according to
the currently set priority, re-
gardless of multiple interface
connections.
Interface Interface to be config-
name ured
ether Ethernet interface
*1 IEEE 802.11b interface
wlan
IEEE 1394 interface
*2
ip1394
*1
Available when
802.11b interface kit is installed.
*2
Available when the optional 1394
interface board is installed.
Reference
For more information about
AutoNet, see p.110 "Using Au-
toNet".
the optional
9
105