Sending Scan File By Scan To Folder; Preparation For Sending By Scan To Folder - Ricoh Aficio 2022 User Manual

5. Sending Scan File by Scan
Scan file can be sent to the folders of the FTP server or the shared folders of Win-
dows. This chapter explains the preparation for sending file by Scan to Folder,
various display screens, procedures for sending, and how to check the sending
result when this function is used.

Preparation for Sending by Scan to Folder

To send by Scan to Folder, the preparation described below is required.
1
Connect to Network
2
Make System Settings
3
Make Scan Settings
Sending files using SMB protocol is available only under the environment of
NetBIOS over TCP/IP. Sending files using SMB protocol is not available under
the NetBEUI environment.
Connect the machine to the network with an Ethernet cable or
IEEE 1394 (optional) cable, or use Wireless LAN (optional).
See Network Guide.
Make the network settings, settings for sending by Scan to Fold-
er such as for protocols, or the destination (sender) settings in
System Settings.
See Network Guide and General Settings Guide.
Make settings for sending such as compression and file type pri-
ority.
See p.19 "Send Settings".
to Folder
57