Bound Original Page Order; Placing Originals In The Optional Auto Document Feeder (Adf) - Ricoh Aficio 2022 User Manual

Bound original page order

When setting bound originals (books,
magazines, etc.), you can select to
have either the left page or right page
sent first. See p.61 "Book Fax", Fac-
simile Reference <Advanced Features> .
Note
❒ You can select whether the left
page or right page is sent first. See
p.158 "User Parameters", Facsimile
Reference <Advanced Features>
(switch 06, bit 6).
Placing Originals in the
Optional Auto Document
Feeder (ADF)
Use the ADF to scan in a stack of orig-
inals in one operation. The ADF can
handle both one-sided and two-sided
originals.
Limitation
❒ Place all the originals to be sent in
a single stack.
❒ You cannot place originals in the
ADF one page at a time or in
sheaves.
Note
❒ The maximum document length is
1200 mm (47").
❒ If you send documents longer than
420 mm (17"), specify the area to be
scanned. If you send such docu-
ments frequently, select Long Doc-
u m e n t m o d e w i t h t h e U s e r
Parameters. If a jam occurs, the
document might be damaged be-
cause scanning will not stop. See
p.16 "Setting a Scan Area". See
p.158 "User Parameters", Facsimile
Reference <Advanced Features>
(switch 14, bit 1).
❒ Documents longer than 800 mm
(32") must be sent by memory
transmission (immediate transmis-
sion is not possible).
❒ If your original is bent or folded,
flatten it before you place it.
❒ When sending thin originals, place
them on the exposure glass.
❒ If an original jammed, press the
{ { { { Clear/Stop} } } } key, and then slowly
remove the original.
❒ You can check information about
the sizes and number of originals
that can be placed in the ADF. See
p.199 "Acceptable Types of Origi-
nals", Facsimile Reference <Ad-
vanced Features> .
A A A A
Adjust the document guide to
match the size of the originals.
B B B B
Align the edges of the originals
and stack them in the ADF face
up.
1.
Limit mark
2.
Document guide
Placing Originals
2
ZLFH050E
15