Troubleshooting; If Your Machine Does Not Operate As You Want; General - Ricoh Aficio 2022 User Manual

If Your Machine Does Not Operate As You
Want
The following chart gives explanations of common problems and messages. If
other messages appear, follow the instructions displayed.
Note
❒ If you cannot make copies as you want because of the paper type, paper size
or paper capacity problems, use recommended paper. See p.161 "Copy Pa-
per".

General

Problem
" " ap-
Please wait.
pears
The display is off.
Nothing happens when the
operation switch is turned
on.
Memory is full.
The function status indica-
tor is red.
The user code entry dis-
play appears.

5. Troubleshooting

Causes
This message appears
when you turn on the oper-
ation switch or change the
toner bottle.
The screen contrast knob is
turned to the dark position.
The machine is in Energy
Saver mode.
The operation switch is
turned off.
The main power switch is
turned off.
There are too many
scanned pages or stored
files: hard disk capacity is
exceeded.
The function associated
with the red indicator was
interrupted.
Users are restricted by user
management.
Solutions
Wait for the machine to get ready.
Set the screen contrast knob to the
light position to see the display pan-
el properly.
Press the { { { { Energy Saver} } } } key to can-
cel Energy Saver mode.
Turn on the operation switch.
Turn on the main power switch.
Press [Delete File] to delete unneces-
sary documents.
Press the function key correspond-
ing to the indicator. Follow the in-
structions that appear on the control
panel.
Enter the user code (up to 8 digits),
and then press [#].
105