Receiving Messages Unconditionally; Receiving Messages According To Parameter-Specified Settings - Ricoh Aficio 2022 User Manual

Note
❒ Reception may not take place if there is not enough free memory.
❒ If free memory reaches 0% during Substitute Reception, any further reception
becomes impossible and the current communication is terminated.
❒ When a fax message is received after Store has been selected for Reception
File Setting in the Facsimile Features menu, the Receive File indicator lights.

Receiving messages unconditionally

If one of the conditions listed below occurs, the machine receives all fax messag-
es using Substitute Reception.
Problems
x is lit.
The machine is printing
with other function.
The message "
Follow-
ing output tray is
full. Remove pa-
per. " appears.
M is lit.

Receiving messages according to parameter-specified settings

If one of the conditions listed below occurs, the machine receives only those mes-
sages that match the conditions specified in the User Parameters. See p.158 "Us-
er Parameters" (switch 05, bit 2,1).
Problems
B is lit.
D is lit.
The message "
This
tray is out of or-
" appears.
der.
You can specify the following conditions with the User Parameters. See p.158
"User Parameters" (switch 05, bit 2,1).
Causes
Paper is jammed.
The machine is busy print-
ing with other function.
The output tray is full.
The cover is open.
Causes
All trays out of paper.
Toner is empty.
All trays out of action.
Solutions
Remove the jammed paper.
See "xCleaning Misfeeds", General
Settings Guide.
The message will be automatically
printed after the current job finishes.
Remove paper from the output tray.
Close the cover shown in the display.
Solutions
Add paper. See "BLoading Paper" ,
General Settings Guide.
Replace the toner cartridge. See
"DAdding Toner", General Settings
Guide.
Call your service representative.
Reception
5
85