Ricoh Aficio 2022 User Manual page 854

Using the Network Delivery Scanner Function
C Press [OK].
D To enter more destinations, re-
peat steps A A A A to C C C C .
Note
❒ To deselect a destination,
press [U U U U Prev.] or [T T T T Next] to
display the destination in the
destination field, and then
press the { { { { Clear/Stop} } } } key.
❒ Pressing the { { { { Check Modes} } } }
key on the control panel lets
you check the list of selected
destinations.
Checking selected destinations
A Use the destination field at the
top of the screen to check
which destinations are select-
ed.
Note
❒ When multiple destinations
7
are selected, the selected des-
tinations are displayed in the
order they were selected by
pressing [U U U U Prev.] or [T T T T Next].
❒ Pressing the { { { { Check Modes} } } }
key on the control panel lets
you check the list of selected
destinations.
G G G G
Specify the sender (scan file de-
livery source) if necessary.
To specify a sender, you can select
the sender from the list, enter the
five-digit registration number of
the sender with the number keys,
and search for the sender and se-
lecting it.
Note
❒ When a sender has been speci-
fied, this information is added
to the scan file. Select a sender
from the senders programed in
the delivery server.
88
When selecting a sender from the
list
A Press [Attach Sender's Name].
B Select the sender.
The selected sender and its reg-
istration number are displayed.
Note
❒ When using ScanRouter V2
Professional, [Return Receipt]
is displayed when a sender is
selected.
❒ When [Return Receipt] is se-
lected, an e-mail notifying
that the file has been read by
the destination party is sent
to the sender selected here.
To use [Return Receipt], it is
necessary to make settings
such as the e-mail address in
advance in ScanRouter V2
Professional.
C Press [OK].