Ricoh Aficio 2022 User Manual page 956

Using the Printer Function
NetWare 4.x, 5/5.1, 6
A A A A
Log on to the file server as an ad-
ministrator, or equivalent.
B B B B
Start SmartNetMonitor for Ad-
min.
C C C C
On the [Group] menu, point to
[Search Device], and then click
[IPX/SPX].
A list of machines appears.
D D D D
In the list, select the printer for
which you want to change config-
uration.
E E E E
5
On the [Tools(T)] menu, click [NIB
Setup Tool].
NIB Setup Tool starts.
F F F F
Click [Property Sheet], and then
click [OK].
The [NIB Setup Tool - Network
board list] dialog box appears.
G G G G
Click the [NetWare] tab, and then
make the following settings:
A In the [Logon Mode] area, select
[File Server Mode] or [NDS Mode].
Note
❒ If [File Server Mode] is select-
ed, a connecting destination
will be chosen based on the
string entered in step C.
❒ If [NDS Mode] is selected, a
connecting destination will
be chosen based on the string
entered in step D.
68
B In the [Print Server Name(P):] box,
enter the name of the print
server.
Important
❒ Use the same name as that of
the print server name to be
set from NWadmin (
Limitation
❒ Enter up to 47 alphanumeric
characters.
C In the [File Server Name(F):] box,
enter the name of the file serv-
er in which a print server is to
be created.
By clicking [Browse(B)...], you
can select a file server among
those listed in the [Browse(B)...]
dialog box.
Limitation
❒ Enter up to 47 alphanumeric
characters.
D In the [NDS Tree(T):] box, enter
the NDS tree name in which to
make the file server.
By clicking [Browse(D)...], you
can select the NDS tree name
and NDS context name from
their lists.
Limitation
❒ Enter up to 32 alphanumeric
characters("-" and "_" can be
used).
E In the [NDS Context(C):] box, en-
ter the context in which the
print server is to be created.
Limitation
❒ Enter up to 127 alphanumer-
ic characters.
F In the [Print Server Operation
Mode] area, click [As Remote
Printer(R)].
M
-C).