Programming The Id Code; Editing The Id Code - Ricoh FAX2050L Advanced Instruction Manuals

Programming the ID Code

To store an ID Code, do the following.
A
Press {Function} {6} and enter the
access code {2} {2} {2} {2}. Press
{6} {1}, and then the {Yes} key.
B
Press V until the following dis-
play is shown.
C
Press the {Yes} key.
kkkk
D
Enter the ID Code that you will be
using.
Note
❒ Example: {4} {3} {6} {3} from
the ten key pad.
❒ Do not use 0000 and FFFF.
E
Press the {Yes} key, and then the
{Function} key.

Editing the ID Code

If you want to change the ID Code, do
the following.
A
Press {Function} {6} and enter the
access code {2} {2} {2} {2}. Press
{6} {1}, and then the {Yes} key.
i
B
Press V until the following dis-
play is shown.
i
C
Press the {Yes} key.
D
Press the {Yes} key, and then the
{No} key.
kkkk
E
Input a new ID.
Note
❒ Example: {5} {4} {3} {3} from
the ten key pad.
F
Press the {Yes} key, and then the
{Function} key.
Using Key Operator Settings
i
i
7
67