Ricoh Aficio 2022 User Manual page 352

Faxing
B B B B
Place the original.
Note
❒ You can scan a few pages of
your original from the exposure
glass and the remaining pages
from the ADF. When you have
finished scanning from the ex-
2
posure glass, remove the origi-
nal from the exposure glass and
place the remaining pages in the
ADF within ten seconds.
❒ To send two or more pages us-
ing the exposure glass, set them
one page at a time.
❒ The original can be placed
whenever, before the { { { { Start} } } } key
is pressed.
Reference
p.13 "Placing Originals"
C C C C
Select the scan settings you re-
quire.
Reference
p.30 "Scan Settings"
D D D D
Dial a destination.
28
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key, and then enter
the correct number.
Reference
p.35 "Specifying a Destination"
p.47 "Chain Dial", Facsimile Ref-
erence <Advanced Features>
p.47 "Redial", Facsimile Refer-
ence <Advanced Features>
E E E E
Press the { { { { Start} } } } key.
Note
❒ Do not lift the ADF during scanning.
After transmission, the standby
display appears.
- Sending originals using the -
- -
exposure glass
A
Make sure that Immed. TX is se-
lected. If it is not, press [Immed. TX].
B Place the first page face down on
the exposure glass.
C Dial a destination.
D Make the scan settings you require.
Press the { { { { Start} } } } key.
E
F Place the next original on the expo-
sure glass within 10 seconds after
the machine has finished scanning
the first original.
Repeat steps D to F for all originals.
G
H
Place the last original, and then
# ].
# #
press [#