Printing With Netware - Ricoh Aficio 2022 User Manual

Printing with NetWare

This describes how to configure the
machine for use as a print server or
remote printer in a NetWare environ-
ment.
NetWare Basic Procedure
Install the NIB Setup Tool
Print Server
Configure the network interface board
Restart the printer
This section assumes NetWare is
functional and the necessary environ-
ment for the NetWare print service is
available.
Note
❒ NetWare must be set to active us-
ing the machine's control panel.
For more information about how
to set it, see p.17 "Setting Up the
Machine on a Network".
Remote Printer
Configure the NetWare
Start the print server
❖ ❖ ❖ ❖ SmartNetMonitor for Admin
To use a printer in a NetWare envi-
ronment, configure the NetWare
p r i n t i n g e n v i r o n m e n t u s i n g
SmartNetMonitor for Admin.
Note
❒ If you configure NetWare print-
ing using SmartNetMonitor for
Admin under the following en-
vironments, NetWare Client
from Novell is required:
• NDS mode in Windows 95/
98/Me
• NDS or Bindery mode in
Windows 2000/Windows
NT 4.0
❖ ❖ ❖ ❖ Printers listed by SmartNetMonitor for
Admin
SmartNetMonitor for Admin dis-
plays a list of printers that are con-
nected to the network.
If you cannot find the printer from
the displayed list, refer to the con-
figuration page printed from the
machine. For more information
about printing a configuration
page, see Printer Reference 2.
Printing with NetWare
61
5