Figure 34 Call Center Connection Page - Nortel Call Center Set Up And Operation Manual

38
Administration
Enter the IP Address or the Network Name of the Call Center platform. If you do not know what
to enter here, consult the Local Area Network Administrator for your site.
If you are entering the connection details for the PC on which the CallPilot 3.0
!
Application Server is running, you must also specify the Port number for which
the Application Server has been configured. This is indicated by entering the IP
Address, a colon and then the Port number.
For example, If the IP address number was 10.1.1.150 and the Port number was
8079, the full entry in this field would be the 10.1.1.150:8079.
Note that the default Port is 8088.
Reporting for Call Center Setup and Operations Guide

Figure 34 Call Center Connection Page

Issue 02 (15)