Handset Option For The M3905 Call Center Telephone - Nortel Meridian M3900 Reference Manual

96 Installation

Handset option for the M3905 Call Center Telephone

The Handset Kit is a hardware option for the M3905 Call Center
Telephone. The handset does not accompany the M3905. The handset
can be added to the M3905 by removing the front plate of the
telephone.
Note: Nortel Networks recommends that a system administrator
complete this installation.
Figure 20
Removal of the hook switch cover
Front view
There are five tabs and two hidden snaps on the Hook Switch cover.
There are two tabs along the right tab tree along the bottom edge (front
view). To remove the cover, you must release the hidden snaps (rear
view).
Procedure 35
Remove the Hook Switch Cover
1
2
3
555-4001-136 Standard 05.06 May 2002
Ease the cover to the left and pull on the left side to release the left snap.
While holding the left snap out, ease the cover to the right and pull on the right
side to release the right snap.
Carefully maneuver the cover out from the three bottom slots and rotate the
cover to release the two side tabs.
This procedure is now complete
Rear view
G100100