Using Callpilot Call Routing With Call Center; Auto Attendant; Custom Call Routing (Ccr) - Nortel Call Center Set Up And Operation Manual

14 Chapter 1 About Nortel Call Center

Using CallPilot call routing with Call Center

CallPilot is a versatile business communications tool that you can use to:
• answer incoming calls
• offer callers a selection of options to route their calls or access information
• provide advanced voicemail, Auto Attendant and call handling capabilities
CallPilot has two powerful call routing features: Auto Attendant (AA) and Custom Call Routing
(CCR). These features route incoming calls to telephones and voice mailboxes. You can also use
these features to route calls to Call Center skillsets.

Auto Attendant

The Auto Attendant answers incoming calls and presents callers with a greeting. After the
greeting, the Auto Attendant Menu offers callers a range of options that they can select using the
dialpad of their telephone. Using these options, callers can transfer themselves from the Auto
Attendant to a skillset by entering the Control DN of the skillset.
Note: Include the number of the Control DN in your Auto Attendant Greeting.
For information about how to configure the Auto Attendant, refer to the CallPilot Set Up and
Operation Guide.

Custom Call Routing (CCR)

With CCR you can replace the Auto Attendant menu with an expanded menu that can include
several sub-menus to offer callers a wider range of options. You can give callers access to a Call
Center skillset by adding an internal transfer that transfers the caller to the Control DN of the
skillset.
For more information about transfers and CCR, refer to the CallPilot Manager Set Up and
Operation Guide.
N0008709 04