Installation Safety Guidelines And Warnings; Chassis Lifting Guidelines - Juniper J2300 User Manual

WARNING: Advarsel Bruk kun AWG nr. 26 eller telekommunikasjonsledninger med
større dimensjon for å redusere faren for brann.
WARNING: Aviso Para reduzir o risco de incêndio, utilize apenas terminais de fio de
telecomunicações Nº. 26 AWG ou superiores.
WARNING: ¡Atención! Para reducir el riesgo de incendios, usar sólo líneas de
telecomunicaciones de calibre No. 26 AWG o más gruesas.
WARNING: Varning! För att minska brandrisken skall endast Nr. 26 AWG eller
större telekommunikationsledning användas.

Installation Safety Guidelines and Warnings

Observe the following guidelines and warnings before and during
Services Router installation.

Chassis Lifting Guidelines

The weight of a fully configured chassis is approximately 12 lbs (5.4 kg)
for a J2300 Services Router, 21 lbs (9.5 kg) for a J4300 Services Router,
and 24 lb (10.9 kg) for a J6300 Services Router. Observe the following
guidelines for lifting and moving a Services Router:
Before moving the Services Router, read the guidelines in "Preparing for Router
Installation" on page 541 to verify that the intended site meets the specified
power, environmental, and clearance requirements.
Before lifting or moving the Services Router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather
than your back. Keep your knees bent and your back relatively straight and
avoid twisting your body as you lift. Balance the load evenly and be sure
that your footing is solid.
Safety and Regulatory Compliance Information
Safety Guidelines and Warnings
577