Juniper J2300 User Manual page 342

J-series™ Services Router User Guide
4.
Table 114: OSPF Routing Quick Configuration Summary
Field
Router Identification
Router Identifier (required)
OSPF
Enable OSPF
OSPF Area ID
312
Configuring an OSPF Network with Quick Configuration
To cancel your entries and return to the Quick Configuration Routing
page, click Cancel.
To check the configuration, see "Verifying an OSPF Configuration" on page 325.
Function
Uniquely identifies the router.
Enables or disables OSPF.
Uniquely identifies the area within its AS.
Your Action
Type the Services Router's 32-bit IP
address, in dotted decimal notation.
To enable OSPF, select the check
box.
To disable OSPF, clear the check
box.
Type a 32-bit numeric identifier for the
area, or an integer.
If you enter an integer, the value is
converted to a 32-bit equivalent. For
example, if you enter 3, the value
assigned to the area is 0.0.0.3.