Juniper J2300 User Manual page 485

Task
Apply the virtual channel group to the
logical interface t3–1/0/0.0.
J-Web Configuration Editor
1.
Click Add new entry next to
Interfaces.
2.
In the Interface name box, type the
name of the interface—t3–1/0/0.
3.
Click Add new entry next to Unit.
4. In the Unit number box, type the
logical interface unit number—0.
5. In the Virtual channel group box,
type the name of the previously
configured virtual channel
group—wan-vc-group.
6.
Click OK.
Configuring CoS with DiffServ with a Configuration Editor
Configuring Class of Service with DiffServ
CLI Configuration Editor
Enter
set interfaces t3–1/0/0 unit 0
virtual-channel-group wan-vc-group
455