Figure 82: Quick Configuration Routing Page for OSPF
To configure a single-area OSPF network with Quick Configuration:
1.
2.
3.
In the J-Web user interface, select Configuration>Routing>OSPF Routing.
Enter information into the Quick Configuration Routing page for OSPF,
as described in Table 114.
Click one of the following buttons:
To apply the configuration and stay on the Quick Configuration
Routing page for OSPF, click Apply.
To apply the configuration and return to the Quick Configuration Routing
page, click OK.
Configuring an OSPF Network with Quick Configuration
Configuring an OSPF Network
311